6 Inch Digital Calliper with Extra Large LCD Screen Electronic Measuring Tool
- Brand: Trimming Shop
- Type: Digital Caliper
- Measuring Range: 0 - 150mm
- Resolution: 0.01mm
- Accuracy: ± 0.02mm (<100mm) / ± 0.03mm (>1000-200mm)
- Repeatability: 0.01mm
- Max Measuring Speed: 1.5m/Sec
- Measuring System: Linear Capacitive Measuring System
- Display: LCD
- Power: One Alkaline Lithium Button Cell Battery 1.5v, Type: Lr44, Capacity: 180mah
- Working Temperature: 5-40c /41 To 104 Degree F
- Pack Includes: Digital Caliper, Case, Small Screwdriver, Instruction Manual, Batteries
Stainless Steel Digital caliper Vernier is rust proof and impermeable to dust from any direction. A selection button enables reading to be displayed in metric or imperial format.
Three Operating Buttons: Inch/mm, On/Off, Zero.
Measuring tool provides precision readings from 0 - 6 in / 0 -150 mm; Resolution: 0.0005" / 0.01 mm; Accuracy: ±0.00 1in / 0.02 mm (<100mm), ±0.00 1 in / 0.03 mm (100mm-200mm) through a large LCD screen.
The four-way measurement function provides a choice of readings in external, internal, depth and step modes.
High contrast LCD screen for easy and clear reading. Provides handy conversion chart at the back with mm/inch conversion. Working temperature: 5-40c /41 to 104 Degree F.
Comes with a storage case including screw driver with snap lock closures which protects this sensitive measuring device from drops and impacts.
Portable, lightweight, durable, convenient to carry and easy to use. Accurate position lock and a fine adjustment roller allows precise measurements to be taken quickly and easily. Auto-Off function switch offs caliper if not used more than 5 minutes to save battery life.
Care & Instructions: Keep away from water. Use clean dry cloth to clean surface. Turn off the unit when not in use. Recommended to avoid contact with electronic device.
NOTE: Flashing display indicates low battery to replace. Remove battery cover by sliding cover in the direction indicated and replace battery with positive side facing out.